Automated, Heated, Cylinder Sampler.
Dimensions
| Height | Width | Depth | |
|---|---|---|---|
| Open | 31.00 in (787 mm) | 10.00 in (254 mm) | 26.00 in (660 mm) |
| Closed | 16.40 in (417 mm) | 10.00 in (254 mm) | 26.00 in (660 mm) |
Wasson-ECE's unwavering commitment to your success
At Wasson-ECE we partner with our clients to improve products and overcome technical challenges. We do this by providing the highest quality analytical instrumentation and support. We are committed to solving problems and acting in the best interest of our clients.
Specifications
| Power Requirements | 120 VAC 50/60Hz, 20 Amp Circuit |
| 230 VAC 50/60Hz, 16 Amp Circuit |
| Wet Surface Material | Stainless Steel |
| Valve Rotor Material | Valcon P |
| Sample Cylinder Volume | 300 - 1000 cc |
| Sample Cylinder Maximum Length* | 20.50 in (521 mm) |
| Sample Cylinder Maximum Diameter | 4.25 in (108 mm) |
| Sample Pressure | 6 - 400 psig |
| Maximum Oven Temperature | 165 ℃ |
Analyzer Compatibility
The SAS100 features the ability to connect to any gas chromatograph which has a digital remote start capability. The system will send a digital signal to prepare the analyzer to run, will then read a digital input signal waiting for the analyzer to report "ready". Once the analyzer is ready, the SAS100 will use a digital output signal to start the analyzer.
By default, the SAS100 comes with a DB9 connector and cable which is compatible with Agilent Technologies GCs. Other connectors are available upon request.
Calibration Standard Port
The SAS100 features a 1/8" Swagelok fitting on the front of the instrument which allows for easy connection to a calibration standard. This port is connected to a sample selection valve within the SAS100 which allows for easy switching between the sample cylinder and the calibration standard.